PlayChoice 10 FAQ
Frequently Asked Questions

This page is dedicated to answering most of the frequently asked questions and to share some of the tips and tricks of owning this great arcade game!

My Reset Button Doesn't Work!
Some PlayChoice 10 Motherboard have a bug which will not allow the RESET button to bring up the PlayChoice 10 game menu. An eaasy alternative to replacing the Motherboard is to press the Channel Select & Enter button at the same time, which also bring up the game menu. We are still tracking which motherboards are affected by this bug, though it is isolated to the Single Monitor Uprights and counter top units.

My Marquee Light Doesn't Work, Where Can I Get A Replacement Bulb!
Nintendo used 100V bulbs and fixtures in their PlayChoice 10 cabinets
instead of the normal 120V. If you want to keep the game original, you can
buy a replacement bulb NEC FL10D at
www.topbulb.com (Special thanks to Patrick M for locating this site.)
, but you may also need a new starter! Another alternative is to replace
the entire fixture(much cheaper about $10.00) from your local lumber/homefixup
store(home depot-lowes-Wallmart), most people have reported plugging them into the 100W outlets in the base of the game works okay while other have spliced them directly into the 120W feed.

Copyright © 1998-2002 Jim Kane - All rights reserved.